OPEN POSSIBILITIES

  • HOME
  • PRODUCTS
  • 5-Axis Vertical Machining Centers UNIVERSAL CENTER MU-V series

PRODUCTS

Back to PRODUCTS

Innovations in volumetric accuracy
Highly rigid trunnion table supports high-accuracy 5-axis machining

High quality machined surfaces with the high following of 5-axis machining

●Highly-rigid trunnion table supports both ends

●With ball-screw cooling (Std), reduced following error is achieved while maintaining highly accurate machining.

The indexing accuracies that take 5-axis machining to higher accuracies (MU-5000V Actual data)

●Indexing accuracy

  • ・A-axis indexing accuracy/Indexing return accuracy: ±0.68 sec/±0.40 sec
  • ・C-axis indexing accuracy/Indexing return accuracy: ±0.78 sec/±0.14 sec

●Fast operation

  • ・A-axis/C-axis 90°clamp/unclamp indexing time: 1.0 sec/1.2 sec
Highly rigid trunnion table supports high-accuracy 5-axis machining
A 5-axis machine that really cuts
Beyond the limits of conventional 5-axis machining
Highly efficient machining with amazing machining capacity
MU-5000V, MU-6300V Actual data ([ ]: MU-6300V specs)
  • Face milling capacity: 504cm3/min (S45C)

    ●ø80 face mill 8 blade (coating)

    • Spindle speed: 895min-1
    • Cutting speed: 225m/min
    • Feedrate: 2,250mm/min
    • Cut width × infeed: 56 × 4mm
    ø80 face mill 8 blade (coating)
  • End milling capacity: 672cm3/min (S45C)

    ●ø20 roughing end mill 7 blade (carbide)

    • Spindle speed: 4,000min-1
    • Cutting speed: 251m/min
    • Feedrate: 4,800mm/min [2,800mm/min]
    • Cut width × infeed: 7 × 20mm [12 × 20mm]
    ø20 roughing end mill 7 blade (carbide)
Process-intensive machining with turning capacity that approaches that of a lathe
Turning capacity: 3mm2 (S45C)
  • Machining dia: ø164mm [ø250mm]
  • Cutting speed: 130m/min (table rotation: 252min-1)
  • Feedrate: 0.6mm/rev
  • Infeed: 5mm

※ The above are actual examples. Your results may vary due to differences in specifications, tooling and cutting conditions.

Process-intensive machining with turning capacity that approaches that of a lathe
Get a real sense of the good visibility and
operability required in 5-axis machining
Superb operator access to the machining chamber
    • Structure allows easy tool edge confirmation during setup and machining

      ●Best table, spindle, and operation panel layout in terms of operability

    • Large step platform for easy working

      ●Operating stress reduced with large platform so that operator does not have to worry about footing

    • Large window for good visibility in machining compartment

    • Structure allows easy tool edge confirmation during setup and machining
    • Large step platform for easy working
Large machining range; tools can be changed with
trunnion still in swing position
The tool reaches the end of the workpiece even with the table at various inclination angles, enabling wide-range 5-axis machining.Tools can be changed with the trunnion still in a swing position, leading to reduced cycle times and higher machining accuracies.
Even the largest workpieces are machined with ease

Machine Specifications

Unit MU-5000V〈-L〉No.40 spindle MU-5000V〈-L〉No.50 spindle
Travels X axis (table L/R) mm (in.) 800 (31.50)
Y axis (spindle saddle front / back) mm (in.) 1,050 (41.34)
Z axis (spindle ram vertical) mm (in.) 600 (23.62)
A axis (trunnion swivel) deg +90 to -120
C axis (table swivel) deg 360 (infinite)
Table surface to spindle nose mm (in.) 80 to 680 (3.15 to 26.77)
Table Table size mm (in.) ø500 (19.69)
Max work size mm (in.) ø700 × H500 (ø27.56 × H19.69)
Floor to table top mm (in.) 1,140 (44.88)
Max load capacity kg (lb) 500 (1,100)
(turning spindle speed) min-1 〈1,000〉
Spindle Spindle speed min-1 10,000 [15,000、20,000、25,000]
〈8,000、 [12,000] 〉
6,000 [12,000]
〈10,000〉
Tapered bore   7/24taper No.40〈HSK-A63〉 7/24taper No.50〈HSK-A100〉
No. of spindle ranges   Infinitely variable
Bearing dia mm (in.) ø70 (2.76) ø90 (3.54)
Feed Rapid traverse m/min (ipm) X-Y-Z: 50 (1,969)
Rapid traverse deg/min A: 18,000 (50min-1) C: 18,000 (50min-1)〈36,000 (100min-1)〉
Cutting feedrate mm/min X-Y-Z: 1 to 50,000
Motors Spindle (10 min/cont) kW (hp) 11/7.5 (15/10) [22/18.5 (30/25),
30/22 (40/30), 15/11 (20/15)]
〈11/7.5 (15/10), [22/18.5 (30/25)]〉
11/7.5 (15/10) [26/18.5 (35/25)]
〈26/18.5 (35/25)〉
Feed axes kW (hp) X: 5.2 (6.9), Y-Z: 3.5 (4.7), A: 3.5 × 2 (4.7 × 2), C: 3.0 (4) 〈5.0 (6.7)〉
ATC Tool shank   MAS BT.40〈HSK-A63〉 MAS BT.50〈HSK-A100〉
Pull stud   MAS2〈-〉
Tool capacity (magazine)   32-tool [48-tool, 64-tool: chain, Over 64-tool: matrix]
Max tool dia (w/adjacent / w/o adjacent) mm (in.) ø90/ø125 (ø3.54/ø4.92) ø100/ø152 (ø3.94/5.98)
Max tool length mm (in.) 400 (15.75)
Max tool weight kg (lb) 8 (17.6) 12 (26.4) [15 (33)]
Tool selection   Memory random (matrix magazine is fixed address system)
Machine size Height mm (in.) 3,435 (135.24)
Floor space W × D (w/o operator platform) mm (in.) 3,995 × 2,750 (157.28 × 108.27) 3,995 × 2,840 (157.28 × 111.81)
Weight kg (lb) 15,400 (33,880) 15,650 (34,430)
CNC   OSP-P300MA〈OSP-P300SA〉

[ ] : Optional

〈 〉: Turning specifications

※With APC specifications, there are limits on maximum pallet load and maximum workpiece dimensions

Unit MU-6300V〈-L〉No.40 spindle MU-6300V〈-L〉No.50 spindle
Travels X axis (table L/R) mm (in.) 925 (36.42)
Y axis (spindle saddle front / back) mm (in.) 1,050 (41.34) (+100 ATC movements)
Z axis (spindle ram vertical) mm (in.) 600 (23.62)
A axis (trunnion swivel) deg +90 to -120
C axis (table swivel) deg 360 (infinite)
Table surface to spindle nose mm (in.) 160 to 760 (6.30 to 29.92)
Table Table size mm (in.) ø630 (24.80)
Max work size mm (in.) ø830 × H550 (ø32.68 × H21.65)
Floor to table top mm (in.) 1,150 (45.28)
Max load capacity kg (lb) 600 (1,320)
(turning spindle speed) min-1 〈800〉
Spindle Spindle speed min-1 10,000 [15,000、20,000、25,000]
〈8,000、 [12,000] 〉
6,000 [12,000]
〈10,000〉
Tapered bore   7/24taper No.40〈HSK-A63〉 7/24taper No.50〈HSK-A100〉
No. of spindle ranges   Infinitely variable
Bearing dia mm (in.) ø70 (2.76) ø90 (3.54)
Feed Rapid traverse m/min (ipm) X-Y-Z: 50 (1,969)
Rapid traverse deg/min A: 10,800 (30min-1)C: 32,400 (90min-1)
Cutting feedrate mm/min X-Y-Z: 1 to 50,000
Motors Spindle (10 min/cont) kW (hp) 11/7.5 (15/10) [22/18.5 (30/25),
30/22 (40/30), 15/11 (20/15)]
〈11/7.5 (15/10), [22/18.5 (30/25)]〉
11/7.5 (15/10) [26/18.5 (35/25)]
〈26/18.5 (35/25〉
Feed axes kW (hp) X: 5.2 (6.9), Y-Z: 3.5 (4.7), A: 4.6 × 2 (6.1 × 2), C: 7.2 (9.6)〈16.0 (21.3)〉
ATC Tool shank   MAS BT.40〈HSK-A63〉 MAS BT.50〈HSK-A100〉
Pull stud   MAS2〈-〉
Tool capacity (magazine)   32-tool [48-tool, 64-tool: chain, Over 64-tool: matrix
Max tool dia (w/adjacent / w/o adjacent) mm (in.) ø90/ø125 (ø3.54/ø4.92) ø100/ø152 (ø3.94/5.98)
Max tool length mm (in.) 400 (15.75)
Max tool weight kg (lb) 8 (17.6) 12 (26.4) [15 (33)]
Tool selection   Memory random (matrix magazine is fixed address system)
Machine size Height mm (in.) 3,525 (138.78)
Floor space W × D (w/o operator platform) mm (in.) 4,850 × 2,990 (190.94 × 117.72)
Weight kg (lb) 17,500 (38,500) 17,700 (38,940)
CNC   OSP-P300MA〈OSP-P300SA〉

[ ] : Optional

〈 〉: Turning specifications

※With APC specifications, there are limits on maximum pallet load and maximum workpiece dimensions

Unit MU-8000V〈-L〉No.40 spindle MU-8000V〈-L〉No.50 spindle
Travels X axis (table L/R) mm (in.) 925 (36.42)
Y axis (spindle saddle front / back) mm (in.) 1,050 (41.34) (+100 ATC movements)
Z axis (spindle ram vertical) mm (in.) 600 (23.62)
A axis (trunnion swivel) deg +90 to -120
C axis (table swivel) deg 360 (infinite)
Table surface to spindle nose mm (in.) 200 to 800 (7.87 to 31.50)
Table Table size mm (in.) ø800 (31.50) × 630 (24.80) width 〈ø800 (31.50)〉
Max work size mm (in.) ø1,000 × H550 (ø39.37 × H21.65)
Floor to table top mm (in.) 1,210 (47.64)
Max load capacity kg (lb) 700 (1,540)
(turning spindle speed) min-1 〈800〉
Spindle Spindle speed min-1 10,000 [15,000、20,000、25,000]
〈8,000、 [12,000] 〉
6,000 [12,000]
〈10,000〉
Tapered bore   7/24taper No.40〈HSK-A63〉 7/24taper No.50〈HSK-A100〉
No. of spindle ranges   Infinitely variable
Bearing dia mm (in.) ø70 (2.76) ø90 (3.54)
Feed Rapid traverse m/min (ipm) X-Y-Z: 50 (1,969)
Rapid traverse deg/min A: 10,800 (30min-1)C: 32,400 (90min-1)
Cutting feedrate mm/min X-Y-Z: 1 to 50,000
Motors Spindle (10 min/cont) kW (hp) 11/7.5 (15/10) [22/18.5 (30/25),
30/22 (40/30), 15/11 (20/15)]
〈11/7.5 (15/10), [22/18.5 (30/25)〉
11/7.5 (15/10) [26/18.5 (35/25)]
〈26/18.5 (35/25〉
Feed axes kW (hp) X: 5.2 (6.9), Y-Z: 3.5 (4.7), A: 4.6 × 2 (6.1 × 2), C: 7.2 (9.6)
ATC Tool shank   MAS BT.40〈HSK-A63〉 MAS BT.50〈HSK-A100〉
Pull stud   MAS2〈-〉
Tool capacity (magazine)   32-tool [48-tool, 64-tool: chain, Over 64-tool: matrix
Max tool dia (w/adjacent / w/o adjacent) mm (in.) ø90/ø125 (ø3.54/ø4.92) ø100/ø152 (ø3.94/5.98)
Max tool length mm (in.) 400 (15.75)
Max tool weight kg (lb) 8 (17.6) 12 (26.4) [15 (33)]
Tool selection   Memory random (matrix magazine is fixed address system)
Machine size Height mm (in.) 3,625 (142.72)
Floor space W × D (w/o operator platform) mm (in.) 5,280 × 2,990 (207.87 × 117.72)
Weight kg (lb) 18,400 (40,480) 18,600 (40,920)
CNC   OSP-P300MA〈OSP-P300SA〉

[ ] : Optional

〈 〉: Turning specifications

※With APC specifications, there are limits on maximum pallet load and maximum workpiece dimensions