OPEN POSSIBILITIES

PRODUCTS

Back to PRODUCTS

Machine Specifications

Item Unit LU-S1600
480 DBC 550 DBC 1000 DBC
Capacity Standard chucks 8 inch
Swing over bed mm (in.) ø500 (19.69)
Max. turning diameter mm (in.) ø160 (6.30)
Max. turning length mm (in.) 480 (18.90) 550 (21.65) 1,000 (39.37)
Travel XA, XB axis mm (in.) 100 (3.94)
ZA, ZB axis mm (in.) 500 (19.69) 570 (22.44) 1,100 (43.31)
Spindle Speed mm-1 40 to 4,000: OSP/FANUC [50 to 6,000: OSP only]
Nose type JIS A2-6 [ø140 flat]
Front bearing dia. mm (in.) ø100 (3.94)
Bore dia mm (in.) ø62 (2.44)
Turret Type (both upper/lower) V6
No. of tools (both upper/lower) tool 6
OD tool shank dimensions mm (in.) □25 (0.98)
ID tool shank diameter mm (in.) ø32 (1.26)
Indexing time sec/1 index 0.15
Feedrate Rapid feedrate m/min (fpm) X: 20 Z: 30 (X: 65.62 Z: 98.43)
Tailstock Movable tailstock Handle [NC]
Tapered bore type MT No. 5 (revolving center) [MT No. 4 (built-in center)]
Travel mm (in.) 340 (13.39) 300 (11.81) 700 (27.56)
Quill diameter mm (in.) ø90 (3.54)
Quill travel mm (in.) 120 (4.72)
Motor Spindle drive [OSP] kW (hp) 4,000 min-1: 11/7.5 (15/10) (30 min/cont) [15/11 (20/15) (30 min/cont)]
[Integral motor 6,000 min-1: 11/7.5 (20 min/cont) 15/11 (15 min/cont)]
Spindle drive [FANUC] kW (hp) 4,000 min-1: 11/7.5/7.5 (15 min/60 min/cont)
[4,000 min-1: 15/11/11 (15 min/60 min/cont)]
Machine size Machine height mm (in.) 2,054 (80.51) 2,247 (88.46)
Floor space (machine only) mm (in.) 2,440 × 1,980 (96.06 × 77.95) 3,235 × 2,282 (127.36 × 89.84)
Spindle center height mm (in.) Side discharge : 1,145 (45.08)
Machine weight kg (lb) 5,000 (11,000) 6,200 (13,640)
CNC OSP-P300LA , FANUC 0i-TF

[ ]: Optional