OPEN POSSIBILITIES

  • HOME
  • PRODUCTS
  • Large 5-Axis Machining Centers MILLAC VH series

PRODUCTS

Back to PRODUCTS

5-axis machining centers with a swivel spindle to machine inclined surfaces Large 5-Axis Machining Centers MILLAC VH series

Machine Specifications

Item Unit MILLAC 800VH MILLAC 1000VH
Travel X axis mm (in.) Column horizontal: 1,020 (40.16) Column horizontal: 1,850 (72.83)
Y axis mm (in.) Pallet front/back: 1,020 (40.16) Pallet front/back: 1,300 [1,600] (51.18 [62,99])
Z axis mm (in.) Spindlehead vertical: 1,020 (40.16) Spindlehead vertical: 1,000 (39.37)
Spindle nose to pallet top (vertical) mm (in.) -100 to 920 (-3.94 to 36.22) -100 to 900 (-3.94 to 35.43)
Spindle center to pallet center (vertical) mm (in.) -50 to 970 (-1.97 to 38.19) -580 to 1,270 (-22.83 to 50)
Spindle center to pallet top (horizontal) mm (in.) 150 to 1,170 (5.91 to 46.06) 150 to 1,150 (5.91 to 45.28)
Spindle nose to pallet center (horizontal) mm (in.) -300 to 720 (-11.81 to 28.35) -830 to 1,020 (-32.68 to 40.16)
Table Max work dimension mm (in.) 800 × 800 (31.49 × 31.49) 1,000 × 1,000 (39.37 × 39.37)
Max load capacity* kg (lb) 1,000 (2,200) 2,000 (4,400)
Indexing angle (curvic coupling orientation) deg 5
Indexing angle (any NC orientation) deg 0.001
Floor to pallet top mm (in.) 1,230 (48.43) 1,290 (50.79)
Spindle Spindle speed min-1 100 to 10,000 20 to 6,000 [100 to 10,000]
Spindle taper hole No. 50
Indexing angle (curvic indexing) deg 5
Indexing angle (NC arbitrary indexing) deg 0.001
Axis feed Rapid traverse m/min (ipm) X-Y-Z: 30 (1,181) X-Y: 24 (949), Z: 12 (472)
Rapid traverse min-1 A-C: 3,600 B-C: 1,440
Cutting feed mm/min (ipm) X-Y-Z: 1 to 12,000 (0.04 to 472) X-Y-Z: 1 to 10,000 (0.04 to 394)
Cutting feed deg/min A-C: 1 to 2,400 B-C: 1 to 1,080
Motors Spindle kW (hp) 22/18.5 (30/25) (15 min/cont) 22/18.5 (30/25) (30 min/cont)
[22/18.5 (30/25) (15 min/cont)]
Feed axes (X/Y & Z) kW (hp) {OSP} X: 5.6 (7.5), Y: 3.5 (4.7), Z: 5.6 (7.5)
{FANUC} X-Y: 7.0 (9.3), Z: 6.0 (8)
{OSP} X-Y-Z: 4.6 (6.1)
{FANUC} X-Y: 7.0 (9.3), Z: 6.0 (8)
ATC Tool shank MAS 403 BT50
Pull stud MAS 2
Tool capacity tool 80 [120] 40 [60, 80, 120]
Max tool dia (w/adjacent tool) mm (in.) ø125 (4.92) ø120 (4.72)
Max tool dia (w/o adjacent tool) mm (in.) ø200 (7.87) ø200 [ø240] (7.87 [9.45])
Max tool length/weight mm/kg 400/20 400 [500] / 20 [25]
Max tool moment N-m (ft-lbf) 14.7 (10.84) 19.6 [44.1] (14.45 [32.52])
Tool selection Fixed address
Size Machine height mm (in.) {OSP:} 3,650 (143.70) {OSP:} 4,455 (175.39)
Floor space Width × depth mm (in.) {OSP:} 4,800 × 6,400 (188.98 × 251.97) {OSP:} 5,228 × 7,052 (205.83 × 277.64)
Weight kg (lb) 22,000 (48,400) 24,000 (52,900)
Controller OSP-P300MA, FANUC 31i-B5

[ ]: Optional specification

* APC swivel time uses difference of less than 1,000 kg in loading mass on pallets A and B.