OPEN POSSIBILITIES

  • HOME
  • PRODUCTS
  • Horizontal Machining Center MILLAC HⅡ series

PRODUCTS

Back to PRODUCTS

Significantly reduced cycle times and higher productivity for small parts—all with a compact body. Horizontal Machining Center MILLAC HⅡ series MILLAC 44HⅡ/MILLAC 55HⅡ

Machine Specifications

Model Unit MILLAC 44HⅡ
Machine Configuration Rotary Table Specs 2P-APC Specs
Travel X-axis travel (table L/R) mm (in.) 410 (16.14)
Y-axis travel (spindle U/D) mm (in.) 460 (18.11) 395 [460] (15.55 [18.11])*
Z-axis travel (table B/F) mm (in.) 470 (18.50)
Table to spindle center mm (in.) 55 to 515 (2.17 to 20.28) 0 to 395 (0 to 15.55)
[−65 to 395 (−2.56 to 15.55)] *
Table center to spindle nose mm (in.) 100 to 570 (3.94 to 22.44)
Table(pallet) Max work dimension mm (in.) ø320 (ø12.60) 320 × 320 (12.60 × 12.60)
Floor to table top mm (in.) 1,035 (40.75) 1,155 (45.47)
Indexing angle degrees 0.001 (NC)
Max load workpiece dimensions mm (in.) ø400 × 500 (ø15.75 × 19.69)
Max load capacity kg (lb) 200 (440) 150 (330)
Spindle Spindle speed min-1 120 to 12,000
Tapered bore 7/24 taper No. 40
Bearing dia mm (in.) ø60 (ø2.36)
Feedrates Rapid traverse m/min X-Y-Z : 50
Rapid traverse min-1 B : 44.4 B : 40.0
Cutting feedrate mm/min X-Y-Z : 1 to 20,000
Motors Spindle kW (hp) 15/11 (20/15) (25%ED/Cont)
Feed axes kW (hp) OSP : X 2.2, Y 4.5, Z 3.0 (X 3.0, Y 6.0, Z 4.0)
FANUC : X 2.5, Y 4.5, Z 2.7 (X 3.4, Y 6.0, Z 3.6)
Table drive motor kW (hp) OSP B : 2.2 (3.0), FANUC B : 2.5 (3.4)
ATC Tool shank MAS BT40
Pull stud MAS 2
Tool capacity tools 10 [24]
Max tool dia (w/adjacent) mm (in.) ø90 (ø3.54)
Max tool dia (w/o adjacent) mm (in.) ø115 (ø4.53)
Max tool length mm (in.) 250 (9.84)
Max tool weight/Max tool mass moment kg/N-m 5/4.9
Tool selection Memory random
Machine Size Height mm (in.) 2,725 (107.28)
Floor space (length x width) mm (in.) 1,350 × 2,842 (53.15 × 111.89) 1,350 × 3,490 (53.15 × 137.40)
Weight kg (lb) 6,000 (13,200) 6,500 (14,300)
Control OSP-P300MA, FANUC 0i-MF

[ ]: Optional
* When automatic tool breakage detector (optional) is used

Model Unit MILLAC 55HⅡ No.50 (No.40)
Machine Configuration Rotary Table Specs 2P-APC Specs
Travel X-axis travel (table L/R) mm (in.) 520 (20.47)
Y-axis travel (spindle U/D) mm (in.) 600 (23.62) 450 (17.72)
Z-axis travel (table B/F) mm (in.) 740 (29.13) 520 (20.47) (+220 APC travel)
Table to spindle center mm (in.) 50 to 650 (1.97 to 25.59) 50 to 500 (1.97 to 19.69)
Table center to spindle nose mm (in.) 150 to 890 (5.91 to 35.04) 150 to 670 (5.91 to 26.38)
Table(pallet) Max work dimension mm (in.) ø500 (19.69) 400 × 400 (15.75 × 15.75)
Floor to table top mm (in.) 1,120 (44.09) 1,270 (50.00)
Indexing angle degrees 0.001 (NC)
Max load workpiece dimensions mm (in.) ø500 × 600 (ø19.69 × 23.62)
Max load capacity kg (lb) 500 (1,100) 350 (770)
Spindle Spindle speed min-1 60 to 8,000 (120 to 12,000)
Tapered bore 7/24 taper No.50 <7/24 taper No. 40>
Bearing dia mm (in.) ø90 <ø60> (ø3.54 <ø2.36>)
Feedrates Rapid traverse m/min X-Y-Z : 40
Rapid traverse min-1 B : 62.5
Cutting feedrate mm/min X-Y-Z : 1 to 10,000
Motors Spindle kW (hp) OSP : 18.5/11 (25/15) (15%ED/Cont)
FANUC : 18.5/11 (25/15) (40%ED/Cont) <15/11 (20/15) (25%ED/Cont)>
Feed axes kW (hp) OSP : X-Y-Z : 3.5 (4.7)
FANUC : X 4.5 (6.0), Y-Z : 5.5 (7.3)
Table drive motor kW (hp) OSP B : 3.5 (4.7), FANUC B : 4.0 (5.3)
ATC Tool shank MAS BT50 <MAS BT40>
Pull stud MAS 2 <MAS 2>
Tool capacity tools 30 [120] <24>
Max tool dia (w/adjacent) mm (in.) ø120 <ø90> (ø4.72 <ø3.54>)
Max tool dia (w/o adjacent) mm (in.) ø150 <ø115> (ø5.91 <ø4.53>)
Max tool length mm (in.) 350 <250> (13.80 <9.84>)
Max tool weight/Max tool mass moment kg/N-m 15 <5>/14.7 <4.9>
Tool selection Fixed address <Memory random>
Machine Size Height mm (in.) 2,810 <2,970> (110.63 <116.93>)
Floor space (length x width) mm (in.) 1,650 × 3,620 (64.96 × 142.52) 1,650 × 4,415 (64.96 × 173.82)
Weight kg (lb) 8,000 (17,600) 8,700 (19,200)
Control OSP-P300MA, FANUC 0i-MF

[ ]: Optional
< >:Spindle No.40 specs