OPEN POSSIBILITIES

  • HOME
  • PRODUCTS
  • Horizontal Machining Centers SPACE CENTER MB-H series

PRODUCTS

Back to PRODUCTS

From machining of mass production parts to machining of large, high value-added parts  Horizontal Machining Centers MB-H series MB-4000H/MB-8000H/MB-10000H

Machine Specifications

Item Unit MB-4000H MB-8000H MB-10000H
Travels X axis (Left/right column/
MB-10000H uses left/right carrier)
mm (in.) 560 (22.05) 1,300 (51.18) 1,400 (55.12)
Y axis (spindle up/down) mm (in.) 560 (22.05) 1,100 (43.31) 1,250 (49.21)
Z axis (table front/back) mm (in.) 625 (24.61) 1,250 (49.21)
Spindle center to pallet top mm (in.) 50 to 610 (1.97 to 24.02) 50 to 1,150 (1.97 to 45.28) -20 to 1,230 (-0.79 to 48.43)
Spindle nose to pallet center mm (in.) 85 to 710 (3.35 to 27.95) 100 to 1,350 (3.94 to 53.15)
Pallet Pallet size mm (in.) 400 × 400 (15.75 × 15.75) 800 × 800 (31.50 × 31.50) 1,000 × 1,000 (39.37 × 39.37)
Max load kg (lb) 400 (880) 2,000 (4,400) [2,500 (5,500)]*1 2,000 (4,400)
Indexing angle deg 0.001 1 [0.001]
Max workpiece dimensions mm (in.) ø600 × 900 (ø23.62 × 35.43) ø1,450 × 1,450 (ø57.09 × 57.09) ø1,400 × 1,450 (ø55.12 × 57.09)
Spindle Spindle speed min-1 (rpm) 50 to 15,000
[50 to 20,000]
50 to 6,000
[12,000, 6,000 high power]
50 to 6,000
[50 to 12,000]
Tapered bore 7/24 taper No. 40 [HSK-A63] 7/24 taper No. 50 [HSK-A100]
Bearing dia mm (in.) ø70 (ø2.76) ø100 (ø3.94)
Feed rate Rapid traverse m/min (ipm) X-Y-Z: 60 (2,362) X-Y-Z: 50 (1,969)
Cutting feed rate mm/min (ipm) 1 to 60,000 (0.04 to 2,362) 1 to 50,000 (0.04 to 1,969)
Motors Spindle (10 min/cont) kW (hp) 26/18.5 (35/25) [30/22 (47/33)] 30/22 (40/30) [37/26 (50/35),
45/37 (60/50) (20 min/cont)]
30/22 (40/30) [37/26 (50/35)]
Feed axes kW (hp) X: 4.6 (6.13),
Y-Z: 3.5 (4.67)
X: 5.1 (6.8),
Y: 3.5 (4.7) × 2, Z: 5.1 (6.8)
X-Y-Z: 4.6 (6.1) × 2
Table indexing kW (hp) 3.0 (4.0) 4.6 (6.1)
ATC Tool shank MAS403 BT40 [HSK-A63] MAS403 BT50 [HSK-A100]
Pull stud MAS 2 [ - ]
Magazine capacity tools 48 [64, 110 to 326] 40 [60, 81 to 285, 320, 400] 40 [60, 100 to 400]
Max tool dia (w/ adjacent) mm (in.) ø70 (ø2.76) ø140 (ø5.51)
Max tool dia (w/o adjacent) mm (in.) ø150*2 (ø5.91) ø240 (ø9.45) [ø315 (ø12.40)]*3 ø240 (ø9.45)
Max tool length mm (in.) 300 (11.81) [400 (15.75)]*3 600 (23.62) [800 (31.50)]*3 *5 600 (23.62)
Max tool weight kg (lb) 10 (22) 25 (55) [30 (66)]*3 25 (55)
Tool selection Memory random*4 Memory random*6 Memory random*7
Machine
Size
Height mm (in.) 2,647 (104.21) 3,449 (135.79) 3,410 (134.25)
Floor space; width × depth mm (in.) 2,420 × 4,700 (95.28 × 185.04) 3,960 × 7,505 (155.91 × 295.47) 4,545 × 6,465 (178.94 × 254.53)
Weight kg (lb) 9,500 (20,900) 27,000 (59,400) 33,600 (73,920)
Controller OSP-P300MA

[ ]: Optional

*1. Machine component movements become slower with this optional specification.

*2. Max tool size 2 pots away can not exceed ø110 mm (ø4.33 in)

*3. Shutter open/close times become longer with the optional specification.

*4. Fixed address for 110 or more tools

*5. Max workpiece diameters may be limited by required tool lengths.

*6. Fixed address for 81 or more tools

*7. Fixed address for 100 or more tools