OPEN POSSIBILITIES

  • HOME
  • PRODUCTS
  • Horizontal Machining Center SPACE CENTER MA-12500H

PRODUCTS

Back to PRODUCTS

High power and high-speed movement improves productivity with large workpieces Horizontal Machining Center SPACE CENTER MA-12500H

Machine Specifications

Item Unit MA-12500H MA-12500H W *1
Travel X-axis travel (table L/R) mm (in.) 2,200 (86.61)
Y-axis travel (spindlehead vertical) mm (in.) 1,600 (62.99) 1,475 (58.07)
Z-axis travel distance (column front/back) mm (in.) 1,650 (64.96)
W-axis travel distance mm (in.) - 500 (19.69)
B axis (pallet swivel) deg ±360
Pallet top to spindle centerline mm (in.) Tapping specs: 50 to 1,650 (1.97 to 64.96),
[T-slot specs: 20 to 1,620 (0.79 to 63.78)]
Tapping specs: 50 to 1,525 (1.97 to 60.04),
T-slot specs: 20 to 1,495 (0.79 to 58.86)
Pallet centerline to spindle nose mm (in.) 225 to 1,875 (8.86 to 73.82) -
Pallet centerline to W-axis spindle nose mm (in.) - -275 to 1,875 (-10.83 to 73.82)
Pallet Pallet dimensions mm (in.) □1,250 (49.21)
Max load capacity kg (lb) Tapping specs: 5,000 (11,000), [T-slot specs: 4,600 (10,120)]
Indexing angle deg 0.001
Max workpiece dimensions mm (in.) Tapping specs: ø2,000 (78.74) × h1,600 (62.99) [T-slot specs: ø2,000 (78.74) × h1,570 (61.81)]
Spindle Spindle speed min-1 50 to 6,000 [10 to 4,500 <gear spindle>]
[50 to 12,000 <integral motor/spindle>]
[50 to 20,000 <integral motor/spindle>]
10 to 3,000 <gear spindle>
Spindle speed ranges Stepless [2 <gear spindle>, Stepless <integral motor/spindle>]
Tapered bore 7/24 taper No. 50 [HSK-100, HSK-A125]
Bearing dia (front bearing) mm (in.) ø100 (3.94) [ø110 (4.33) <gear spindle>] ø200 (7.87)
W-axis feed spindle diameter (Quill dia) mm (in.) - ø130 (5.12)
Feed Rapid traverse m/min (ipm) X-Y-Z: 42 (1,654) X-Y-Z: 42 (1,654), W: 8 (315)
deg/min B: 3,240
Cutting feedrate mm/min (ipm) X-Y-Z: 1 to 42,000 (0.04 to 1,654)
deg/min B: 3,240
Motors Spindle drive kW (hp) 45/37 (60/50) (20 min/cont)
[40/37/30 (55/50/40) (15 min/30 min/cont) <gear spindle>]
[37/26 (50/35) (10 min/cont) <integral motor/spindle>]
[55/50 (75/66) (30 min/cont) <integral motor/spindle>]
37/30 (50/40) (30 min/cont)
<gear spindle>
Feed axes kW (hp) X-Z: 5.2 (7) × 2, Y: 5.1 (7) × 2, B: 4.6 (6) × 2 X-Z: 5.2 (7) × 2, Y: 5.1 (7) × 2, B: 4.6 (6) × 2, W: 3.5 (4.7)
ATC Tool capacity tools [81, 129, 177]
Tool shank MAS BT50 [CAT No. 50, DIN No. 50, HSK-A100, HSK-A125*2]
Pull stud MAS-2 [MAS-1, CAT, CAT Special, DIN, JIS]
Max tool dia (w/ adjacent tool) mm (in.) ø130 (5.12)
Max tool dia (w/o adjacent tool) mm (in.) ø315 (12.40)*3
Max tool length mm (in.) 600 (23.62)
Max tool weight kg (lb) 30 (66)
Max tool moment N-m (ft-lbf) 37 (27)
Tool selection Fixed address
APC No. of pallets 2 [6]
Pallet change system 2-pallet parallel shuttle
Machine size Height mm (in.) 3,781 (148.86)
Floor space W × D mm (in.) 6,880 × 12,512 (270.87 × 492.60) (81-tool ATC magazine), × 13,214 (520.24)
(129-tool ATC magazine), × 14,137 (556.57) (177-tool ATC magazine)
Weight kg (lb) 63,100 (138,820) (81-tool ATC magazine), 63,700 (140,140)
(129-tool ATC magazine), 64,000 (140,800) (177-tool ATC magazine)
CNC OSP-P300MA

[ ] Optional

*1. W-axis specs are Optional.

*2. HSK-A125 shank not available for 6,000, 12,000, and 20,000 min-1 spindles.

*3. With 20,000 min-1 spindle, the Max tool dia (w/o adjacent tool) is ø315mm.